Difference between revisions of "DNS and Failover"
(→Basic DNS setup)
|Line 11:||Line 11:|
== Basic DNS setup ==
== Basic DNS setup ==
The primary DNS records are managed at
The primary DNS records are managed at , but they redirect to nameservers at Amazon. So most DNS changes must be managed through the Route 53 system.
== Detecting Failure ==
== Detecting Failure ==
Latest revision as of 19:04, 1 May 2019
Dryad's DNS and failover system is managed by Amazon Route 53. During outages of the primary Dryad server, the failover system re-routes traffic to a secondary server.
- Provide one way replication to a read only copy of the primary datadryad.org server
- Make replication as close to real time as possible
- Make failover to the secondary server and failback to the primary server automatic
This page focuses on the process for failover. For details about the servers that serve as primary and secondary, see WG:Server Setup.
Basic DNS setup
The primary DNS records are managed at University of California, but they redirect to nameservers at Amazon. So most DNS changes must be managed through the Route 53 system.
Failover is based on tests made by Amazon Route 53. There is a health called "Failover -- Primary Test". This test combines the results of some other tests to determine whether the failover should occur. When this test is triggered, the Amazon DNS system will start delivering the IP address for the secondary server instead of the primary server.
Failover can be manually triggered (e.g. for system upgrades) using a process described on the WG:Emergency page.
What happens during a failure
- During a failure of the primary server, all datadryad.org requests go to the secondary server.
- Apache is configured on the secondary server to disallow logins or submission of data.
- The Dryad pages have login/submission features replaced with messages saying the feature is currently disabled.
- If users try to access a login/submission URL directly (e.g., using a link from an integrated journal), a static HTML page is displayed. This page explains that submissions are currently disabled.
Apache mod_rewrite and mod_substitute disable logins to this instance of Dryad
Files replicate by rsync.
Keeping secondary server in sync
Main rsync of data files
There is a cron job on the secondary server (root account) that performs the rsync every minute: /root/scripts/rsync-from-ncsu.sh
- Solr master-slave replication for solr indexes as per http://wiki.apache.org/solr/SolrReplication
- Configuration is stored in /opt/dryad/solr/<index>/conf/solrconfig.xml, with different settings on the primary and secondary machines.
- Can see some details with http://secundus.datadryad.org/solr/dryad/replication?command=details
Database sync (bucardo)
If the sync email (nightly cronjob on this system to email@example.com) shows that PGSQL tables are out of sync, then on the secondary server run these commands to resync all tables:
bucardo_ctl update sync dryad_delta_sync3 onetimecopy=1 bucardo_ctl reload dryad_delta_sync3 bucardo_ctl status dryad_delta_sync3
- The secondary system is running Bucardo which provides asynchronous database replication of the dryad_repo database from the primary server at NCSU to the secondary server at Duke
Sysadmin notes on Bucardo
Notes in this section need to be validated. They may not apply to Dryad, since they were originally used for other NESCent projects.
- does not add sequences by default, add them just like tables
- async master-master replication - using swap sync whichever row in a DB was changed most recently can be updated on the other DB. Right now only 2 DBs are supported.
- install instructions are good except for the need for the following
#bucardo_ctl set firstname.lastname@example.org #bucardo_ctl set email@example.com [root@pikaia ~]# cat /etc/bucardorc dbpass=thebucardopass debugfile=0
- Set up cron jobs!!!!! http://bucardo.org/wiki/Bucardo/Cron
- set up replication on slave server where db is bodysize_production and schema_info is a table without a primary key
createdb -Upostgres bodysize_production pg_restore -Upostgres -F c -d bodysize_production bodysize_production bucardo_ctl add database bodysize_production name=bodysize_master host=hyneria.nescent.org user=postgres pass=thepassword bucardo_ctl add database bodysize_production name=bodysize_slave host=localhost user=postgres pass=thepassword # add all tables except schema_info which has no primary key to a delta sync bucardo_ctl add all tables db=bodysize_master --herd=bodysize1 -T schema_info # if you want to add sequences add the following # bucardo_ctl add all sequences db=bodysize_master --herd=bodysize1 bucardo_ctl add sync bodysizedelta source=bodysize1 targetdb=bodysize_slave type=pushdelta bucardo_ctl validate bodysizedelta # add tables without primary keys to a separate fullcopy sync bucardo_ctl add herd bodysize2 schema_info bucardo_ctl add table schema_info db=bodysize_master --herd=bodysize2 bucardo_ctl add sync bodysizefull source=bodysize2 targetdb=bodysize_slave type=fullcopy #to get the sync going, since it is already running we will reload instead of bucardo_ctl start bucardo_ctl reload_config bucardo_ctl kick bodysizefull bucardo_ctl status bucardo_ctl status bodysizefull #force a full copy rather than a delta with the following two commands to catch up with changes that occurred between the pg_restore and pushdelta sync bucardo_ctl update sync bodysizedelta onetimecopy=1 bucardo_ctl reload bodysizedelta rubyrep scan be used to double-check sync status ./rubyrep scan -s -b -c bodysize.conf
- some more about Bucardo at Bucardo wiki
(This section needs to be updated for Amazon)
Ideas for improvement:
- See Trello card on cloud architecture
- We need to have solr run in a separate instance of tomcat or jetty or upgrade to the latest solr before this will work. Jetty would probably use less memory.
- If we don't want to depend on a third party like MCNC or want more extensive "health" checks, we could set up a virtual machine (or two) at a cloud host such as EC2 and use it for failover. This would allow for more extensive testing of the primary site in order to trigger a failover. I have used this in the past (http://cbonte.github.com/haproxy-dconv/configuration-1.4.html#4-http-check expect) and it can trigger failover based on a string in the HTTP response similar to our current Nagios heath checks. This would also be inexpensive ($50-$100/month) as the virtual machines could be very small such as EC2 micro instances. Large data transfers could go directly to the primary server rather than through the load balancer and thus would not count against any bandwidth quotas.
- Rather than rsync, we could use something like glusterfs or csync or unison for real time two-way file replication. This would require extensive testing and be much more complex, but is a mature technology and widely used - http://www.gluster.org/community/documentation/index.php/Gluster_3.2:_Managing_GlusterFS_Geo-replication. I am have been using glusterfs on 8 old DSCR nodes we used for OpenSim.
- If we want to stick with MCNC or another failover service using HTTP status for heath checks, we could set up Nagios health checks of the production site that would shut down Apache and trigger a failover if a certain string is not on the website.
- Use two way database replication. Bucardo supports this and the basics could be set up fairly easily, but would require much testing.
- Make the failover site read/write. If we control the failover process, we could make the secondary server read/write. Before we would switch back to the primary, we could sync files and the database back from the secondary to the primary. This would involve some down time and more complication, but it doable.
- SOLR 4 (in alpha as of 8/2012) should handle master-master replication. Currently SOLR can only perform master-slave replication.
Current rsync settings:
nice -n 11 ionice -c2 -n7 rsync -ahW --progress --stats --delete --exclude 'solr/' --exclude 'access.log*' --exclude 'tivoli/' --exclude 'log/' /opt/ secundus.datadryad.org:/opt/
These items could be synced on a weekly basis or when needed:
rsync -ahW --progress --stats --delete --exclude 'largeFilesToDeposit/' --exclude 'memcpu_dump/' /home/ dryad-dev.nescent.org:/home/
#after changes to production configuration
rsync -ahW --progress --stats --delete --exclude 'access.log*' --exclude 'tivoli/' --exclude 'log/' /opt/ dryad-dev.nescent.org:/opt/
rsync -ahW --progress --stats --delete /usr/local/apache-tomcat-6.0.33/ dryad-dev.nescent.org:/usr/local/apache-tomcat-6.0.33/
rsync -ahW --progress --stats --delete --exclude='logs/' --exclude='temp/' --exclude='newrelic/' /var/tomcat/ dryad-dev.nescent.org:/var/tomcat/
rsync -ahW --progress --stats --delete /usr/java/ dryad-dev.nescent.org:/usr/java/
rsync -ahW --progress --stats --delete /var/www/dryad/ dryad-dev.nescent.org:/var/www/dryad/
#only run during setup
#rsync -avhW --progress --stats --delete /etc/httpd/ dryad-dev.nescent.org:/etc/httpd/