DNS and Failover
From Dryad wiki
Revision as of 05:16, 21 June 2012 by Mattison.nescentatgmail
- Provide one way replication to a read only copy of the primary datadryad.org server
- Make replication as close to real time as possible
- Make failover and failback automatic
- Dryad production at NCSU runs rsync every minute of everything in /opt (unless the previous rsync run hasn't finished) to the failover system at Duke
- The failover system is running Bucardo which provides asynchronous database replication of the dryad_repo database from the primary server at NCSU to the secondary server at Duke
- Apache is configured on the secondary server at Duke to disallow logins or submission of data. Users would never see this FQDN, but the secondary site can be reached directly at dryad-dev.nescent.org
- As member universities of MCNC, Duke and NCSU have access to MCNC's Cisco GSS systems. These systems are redundant and very reliable. MCNC has configured the servers for DNS based failover from the primary to the secondary datadryad.org systems.
- failover is based on http head requests. If the webserver returns a 200 status, the primary site is considered up. If not, the GSS sends new DNS requests to the secondary server until the primary server responds again. http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/gss4400series/v1.3/configuration/cli/gslb/guide/Intro.html#wp1119392
- I have verified that this works as expected using the datadryad.com domain
- Tunnel all traffic between the servers through IPSEC to encrypt all data transfer (and keep from getting blocked by the Duke Intrustion Prevention System)
- Upon approval, switch the datadryad.org and www.datadryad.org names to use the MCNC GSS for failover
Ideas for improvement:
- If we don't want to depend on a third party like MCNC or want more extensive "health" checks, we could set up a virtual machine (or two) at a cloud host such as EC2 and use it for failover. This would allow for more extensive testing of the primary site in order to trigger a failover. I have used this in the past (http://cbonte.github.com/haproxy-dconv/configuration-1.4.html#4-http-check expect) and it can trigger failover based on a string in the HTTP response similar to our current Nagios heath checks. This would also be inexpensive ($50-$100/month) as the virtual machines could be very small such as EC2 micro instances. Large data transfers could go directly to the primary server rather than through the load balancer and thus would not count against any bandwidth quotas.
- Rather than rsync, we could use something like glusterfs for real time file replication. This would require extensive testing and be much more complex, but is a mature technology and widely used - http://www.gluster.org/community/documentation/index.php/Gluster_3.2:_Managing_GlusterFS_Geo-replication. I am have been using glusterfs on 8 old DSCR nodes we used for OpenSim.
- If we want to stick with MCNC or another failover service using HTTP status for heath checks, we could set up Nagios health checks of the production site that would shut down Apache and trigger a failover if a certain string is not on the website.